2005-2007 F-250 / F-350 4WD Power Stop Brake Kit (Rotors & Pads)

2005, 2006, 2007 F-250 / F-350 4WD

Power Stop Front and Rear Brake Kit (Rotors & Pads)

• This performance Ford F-250 brake kit from Stage 3 Motorsports includes power stop brake drilled and slotted brake rotors and power stop ceramic brake pads.

• This is everything you will need to upgrade your 2005-2008 F250s brakes. 4 wheel drive trucks only.

• These Power Stop rotors are stock sizes, so your stock calipers will work perfectly.

Fits Only: FORD F-350 SUPER DUTY PICKUP 4WD Single Rr Whl, except Harley Davidson Pkg. FORD F-350 SUPER DUTY PICKUP 4WD Single rear wheels FORD F-250 SUPER DUTY PICKUP 4WD except Harley Davidson Pkg.

• This kit usually ships out from our warehouse in: 24 Hours

Note from Power Stop Extreme Performance:

IMPORTANT: BREAK IN NEW BRAKE PADS/ROTORS USING THE PAD BEDDING PROCEDURE AS FOLLOWS. PROPER PAD BEDDING CAN PREVENT ROTOR WARPING.

The break in procedure is critical to brake performance. The reason for a proper break in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed. Break in the pads as follows: 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. Then do 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, drive around for as long as possible without excessively heating the brakes and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage. It allows the heated resin in the brake pads to cool and cure. After the brakes have cooled to standard operating temperature, you may use the brakes normally.